Categories: Relief Aid Products
Bucket designed solely for transport and storage of drinking water, made
of food grade virgin HDPE (High Density PolyEthylene)/virgin LDPE (Low
Density PolyEthylene), according to EN1186-3-9 or equivalent
corresponding standard, tough durable UV-resistant that will not
deteriorate in harsh sunlight, and safe for food and drinking water
storage.
The bucket capacity is 14 litres min.
Height 300 mm,
Top diameter 300/310 mm ±5%,
Bottom diameter 240 mm ±5%.
Indicated dimensions are approximate.
Wall thickness (approx. 1.3 mm) shall allow rigid and sturdy quality
with reference to the New "Oxfam Bucket" design also called the "Jerry
Bucket".
The walls must have a smooth gloss finish and meet the bottom of the
bucket with a curved inside surface to prevent dirt and bacteria
accumulation and to facilitate cleaning.
The top is reinforced to prevent ovaling.
The bottom must be smooth and spike free for improved comfort when carried on the head.
This bucket has a very tight-fitting lid with rim-lock design, making it
very difficult to nearly impossible to remove, and with a sturdily
attached, tight-fitting (but removable) clip-on cap, all of the same
material as the bucket. The opening under the cap is 100 mm ±5% large to
allow for easier filling from hand pumps and cleaning of the bucket
without removing the main lid.
The bucket is equipped with a sturdy and comfortable flat plastic handle
(w/no sharp edges) to ensure the easy carrying by hand. The plastic
handle made of LDPE, together with the handle-ears of the bucket, must
be sturdy enough to carry a fully filled bucket weight without bending
or shearing off.
Colour Indication (other colours might be accepted):
Bucket: White or Off-White;
Lid w/clip-on cap: Bright Green (Pantone 7488c) or Cyan Blue.
NOTE: The buckets shall be stackable and their shape shall allow each bucket to be easily split from the stack.
To ensure the easy splitting of buckets from stacks, the buckets shall
be equipped with sturdy downwards extensions of the handle ears, or
other similar in-built stacking-stop, to PREVENT the buckets from being
pressed firmly into each other during packing and transport.
More products related to Relief Bucket HDPE w withlid and 10cm cap 14 l